Welcome to our Canadian store! Enjoy free shipping on orders over $50 CAD.

Language

Circles from Squares

Courtesy of Bullseye Glass

These beautiful cabochons were made from square pieces of glass.

You can create nicely rounded cabochons from stacks of 0.75" (20 x 20 mm) squares, thanks to heat, gravity, and the 6 Millimeter Rule. But be careful...they’re addictive!

Some Design Layer Possibilities

  • Blue/Vanilla part sheet: Scatter Steel Blue Opalescent coarse frit (000146-0003) onto a base of 3-mm Clear sheet glass, then sift a heavy layer of French Vanilla powder (000137-0008) over the top to cover. Fire to a full fuse. Maximize depth by arranging the Clear side toward the top of the stack.
  • River Rock Reaction (See Quick Tip: River Rock Reaction)
  • Pieces of Citronelle Opalescent (000221-0030) and
  • Turquoise Blue Opalescent (000116-0030).

The Stack

Top (6 mm): A “lensing” layer of Clear. This layer will stretch considerably. Middle (3-4 mm): This “design” layer will stretch and be visible through the top layer. Use part sheets or pieces of 3-mm sheet glass. Bottom (6 mm): Typically not visible from the front. This layer will stretch the least.

Tips

  • 6-mm Tekta Clear is a natural for this project. It’s more efficient, with fewer pieces to cut, clean and assemble!
  • Measure and score a grid of 0.75" squares, then run them using the Rule of Halves. Two layers of 3 mm will also work.
  • A dab of GlasTac Gel will keep the stack together before firing.
  • The stacks flow out to about 1.25" (32 mm) in diameter, so give them room.
  • For the cleanest release, we recommend firing on ThinFire.

Cabochon Firing Schedule

Rate Temperature Hold

1 400°F (222°C) 1225°F (662°C) :30 2 600°F (333°C) 1525°F (829°C) :30 3 AFAP 900°F (482°C) 1:00 4 100°F (56°C) 700°F (371°C) :00 5 AFAP 70°F (21°C) :00 Note: This heatwork goes beyond what the glass is tested for. Some styles may opalize and/or shift in compatibility. Test before making multiples.